In Office

Stainless Smile In Office Kit Patented

38% Hydrogen Peroxide Premixed Gel - NEW Six Patient Kit

A six patient Kit of 38% Hydrogen Peroxide premixed gel system that contains

Hyaluronic Acid as a desensitzer for a more comfortable bleaching process.

Also its unique proprietary formula accelerates the bleaching process with immediate results.

30 Minute Procedure
Up to 12 Shades lighter
Non-aggressive formula that maintains the natural tooth lustre
Contains Hyaluronic Acid, Sodium Fluoride and Potassium Nitrate as desensitizers
Broad spectrum formula that can be used with a variety of lights or without lights
10% Phosphoric Paste as Optional pre treatment for the removal of the pellicle layer
Gingival Barrier easy to apply and remove in one piece
Complimentary marketing brochures and posters

Accessories
Gingival Barrier Refill Reorder 20002 (2 x 1g Syringes/Tips)

Desensitizer Gel 20003 (2 x 2.5g Gel Syringes/Tips)
10% Phosphoric Paste Refill 20007 (2 x 2g Syringes)

38% Hydrogen Peroxide Premixed Gel Kit - 6 Patient - Reorder 20008
Contents: 6x4.5g 38% Hydrogen Peroxide Gel Pots,
                6x1g Gingival Barrier Syringes,
                2x2g 10% Phosphoric Paste Syringe (Optional Pretreatment),
                2x2g Desensitizer Gel Syringes,
                6x20G Blunt Needles, Microbrushes, Instructions and MSDS.

Stainless Smile In Office Kit Patented

38% Carbamide Peroxide Premixed Gel - NEW Six Patient Kit

A six patient Kit of 38% Carbamide Peroxide premixed gel system that contains Hyaluronic Acid as a desensitzer for a more comfortable bleaching process.

30 Minute Procedure
Up to 12 Shades lighter
Non-aggressive formula that maintains the natural tooth lustre
Contains Hyaluronic Acid, Sodium Fluoride and Potassium Nitrate as desensitizers
Broad spectrum formula that can be used with a variety of lights or without lights
10% Phosphoric Paste as Optional pre treatment for the removal of the pellicle layer
Gingival Barrier easy to apply and remove in one piece
Complimentary marketing brochures and posters

Accessories
Gingival Barrier Refill Reorder 20002 (2 x 1g Syringes/Tips)
Desensitizer Gel 20003 (2 x 2.5g Gel Syringes/Tips)

10% Phosphoric Paste Refill 20007 (2 x 2g Syringes)

In Office Kit 38% Carbamide Peroxide Premixed Gel Kit - 6 Patient - Reorder 20009
Contents: 6x4.5g 38% Carbamide Peroxide Gel Pots,
                6x1g Gingival Barrier Syringes,
                2x2g 10% Phosphoric Paste Syringe (Optional Pretreatment),
                2x2g Desensitizer Gel Syringes,
                6x20G Blunt Needles, Microbrushes, Instructions and MSDS.

Stainless Smile In Office Kit Patented

38% Hydrogen Peroxide Liquid/Powder System Premixed Gel - Three Patient Kit

A unique In-Office system of whitening activators that make hydrogen peroxide more active. The Stainless Smile formula is a non-aggressive formula that whitens teeth whilst maintaining their natural lustre. In other words, it does not contain any etchants that erode teeth.

The kit contains a 10% Phosphoric Acid Paste (Optional Pre-treatment), which is intended for the removal of the pellicle layer of the teeth. This is only applied on the teeth for 2 seconds, then is washed away, it barely gets through the pellicle layer of the teeth. (Pellicle layer is a thin layer of tooth surface inorganic rubbish.) Whereas the actual bleaching formulations of other In-Office/Take Home products available on the market, contain harmful etchants that erode away the tooth enamel as they sit on the teeth for 1/2 - 1 hour and are aggressively eroding the teeth, thus losing their natural lustre. Dentists using such products then would have to use a resin coating to varnish the teeth to re-gain lustre. This resin coating will prevent any future bleaching system from working as it will function as a barrier. In a few months time the resin coating will wear away and cause more staining due to the microscopic pits trapping food and colours. Stainless Smile does not contain any etchants in its formulations. It simply oxidizes coloured stained molecules into colourless ones.

Key Benefits

Non-aggressive formula that maintains the natural tooth lustre
A unique formulation of the In-Office system of whitening activators that make hydrogen peroxide more active
Up to 12 Shades Lighter in 30 minute treatment.
10% Phosphoric Acid Paste for the pellicle layer removal.
Desensitizers - Hyaluronic Acid, Sodium Fluoride, Potassium Nitrate.
Gingival Barrier - Easy to apply and remove in one piece.
Once the activator powder is mixed with the peroxide it lasts up to 24 hours and still be effective.
Broad spectrum formula that can be used with a variety of lights.
Excellent results can also be reached without lights.
Long shelf life.
Brochures for the Dentist and Patient available.

C3 Before using In Office

A1 After In Office treatment, 12 shades lighter and teeth maintained their natural lustre.

In office (Liquid/Powder Kit) description

Gingival Barrier (1) – Light cured resin stored in black syringes to protect contents from light. This gel is applied using the blunt needle (3) that locks at the end of the syringe by twisting. It is applied on the gums extending 0.5mm onto the tooth. It is light cured using blue light (visible light). Phosphoric Acid Paste (2) – This is an optional step. It is applied to the tooth by the dentist using a rubber cup for 2 seconds. This step removes the pellicle layer off the tooth's surface that may interfere with the whitening process. Please note that this step must always be done after the application of the gingival barrier. Activator Powder (5) – is mixed with 38% Hydrogen Peroxide liquid (6) to form a gel that is applied using the Microbrush™ (4).

In office Instructions

Remove Kit from refrigerator half an hour before applying.

Record patient's shade using the Vita™Shade Guide before commencing treatment. Application procedure starts from left to right.

Start from the left side of the In-Office Kit and work towards the right.

Step 1

Check and record shade. Place lip retractors. Apply Gingival Barrier first using the blunt tip provided. This is best done, half an arch at a time,

light cure in a fanning motion. Make sure the gingival crevice is sealed extending the coverage area 0.5mm onto the tooth.

Step 2

Remove the pellicle layer using the 10% Phosphoric Acid Paste using rubber cup for 2 sec per tooth, rinse and dry. Some dentists may prefer to use pumice instead.

Step 3

Mix Activator Powder and Peroxide Liquid until uniform consistency and apply with Microbrush™ onto teeth in a thick layer, always keeping clear of gums.

The rule is to leave the gel on teeth for about 9 minutes per pass. During this period it is advantageous to expose the gel to intense light, such as the Tungsten Halogen

Light (composite light) for about 30 sec per tooth. If eight teeth per arch are treated, there will be 1 minute left for the gel to remain on teeth without light. If an arch light

is used then the exposure must be limited to 30 seconds and leave the gel on for 8 minutes and 30 seconds. At the end of 9 minutes suction the gel but do not wash.

Re-apply more gel for the second pass, three passes are usually sufficient, but five passes are not uncommon.

Note: The Operating light may be used instead of the Composite Curing Light without influencing the result.

Step 4

At the end of the procedure remove the Gingival Barrier using tweezers, wash and dry, check and record shade. Please note that bleaching continues to take place even

after the patient has left the surgery, for about 24 hours. To enhance and maintain the results of the In-Office procedure, we recommend the Take Home System which is

available in Hydrogen Peroxide (Day System) and Carbamide Peroxide (Night System) available in different concentrations.

When deciding which concentration is best for your patient, it is useful to remember that Hydrogen Peroxide is faster acting than the Carbamide Peroxide. The Carbamide

Peroxide changes to Hydrogen Peroxide and Urea which is inert. As a rule, divide by three the Carbamide percentage to work out the equivalent strength of Hydrogen Peroxide.

For example 10% Carbamide Peroxide is equivalent to 10÷3=3.33% Hydrogen Peroxide. All strengths will achieve the same result eventually. The higher concentrations work

faster. Day and Night Systems can be used twice a day for 30 minutes for approximately 14 days.

38% Hydrogen Peroxide Liquid Powder Kit - 3 Patient - Reorder 20001

Contents: 6 x 2g 38% Hydrogen Peroxide Liquid
                6 x 0.3g Activator Powder Pots
                3 x 1g Gingival Barrier Syringes
                1 x 2g 10% Phosphoric Paste (Optional Pretreatment)
                6 x 20G Blunt Needles, Microbrushes